Shopping Cart

No products in the cart.

MTN 94 Fluorescent Paint

9,500

MTN Specialty 94 Spray Paint – Fluorescent colours is a low-pressure matte finish covers all spray paint designed to give artists, craftsmen, and DIY’ers the ultimate control. These versatile spray cans allow graffiti artists to achieve precise finish and effects with ease. Montana Colors MTN 94 Fluorescent paints is an ultra-bright hue that glows under black light.

MTN PRO Fluorescent paints is also available for when intense luminosity is key.

To obtain a striking finish, apply a coat of MTN PRO Primer first, and finish it off with a varnish coat of MTN PRO Acrylic Varnish. This is recommended for greater permanence and resistance to wear.

Change the way you spray with MTN’s Specialty Caps. Our caps offered by MTN are interchangeable with MTN 94 cans.

See below for more Product and Usage information

GENERAL DESCRIPTION 

Fluorescent spray paint composed of acrylic solvent-based resins and thermoplastic copolymers, combined with fluorescent pigments (hypnotic) to produce very bright finishes. Its formula consists of opaque base additives that provide greater coverage and make it possible to work directly on dark backgrounds.

FEATURES

  • Fast drying
  • Very bright colours
  • Easy to apply
  • Matte finish
  • Does not contain lead nor other heavy metals
  • Can be applied to many materials
  • Can be applied to damp surfaces
  • Very low UV resistance to sun
  • Can be varnished with an acrylic varnish

To obtain a striking finish, apply a coat of MTN PRO Primer first, and finish it off with a varnish coat of MTN PRO Acrylic Varnish. This is recommended for greater permanence and resistance to wear.

Change the way you spray with MTN’s Specialty Caps. Our caps offered by MTN are interchangeable with MTN 94 cans.

Weight 0.31 kg
Dimensions 20 × 6.5 cm
INSTRUCTIONS FOR USE

– Shake the aerosol well before using, approximately for one minute after hearing the sound of the mixer.

– Apply to clean, dry surfaces. On rusty metallic surfaces remove rust with a wire brush and prepare an anti-rust primer if considered necessary. Apply an anchor layer on plastics and polyesters.

– For best results apply in thin layers. Three thin layers are always better than one thick one, and may be repainted within fifteen minutes with the same paint.

– Turn the aerosol upside down to clean out the valve after use. If te nozzle becomes blocked replace it with a new one.

– Never apply to equipment that is plugged in and use in well ventilated areas.

Reviews

There are no reviews yet.

Be the first to review “MTN 94 Fluorescent Paint”