MTN PRO Metal effects 400ml

– Shake the aerosol well before using, approximately for one minute after hearing
the sound of the mixer.
– Apply to clean, dry surfaces. On rusty metallic surfaces remove rust with a wire
brush and prepare an anti-rust primer if considered necessary. Apply an anchor
layer on plastics and polyesters.
– For best results apply in thin layers. Three thin layers are always better than one
thick one, and may be repainted within fifteen minutes with the same paint.
– Turn the aerosol upside down to clean out the valve after use.
If the nozzle becomes blocked replace it with a new one.
– Never apply to equipment that is plugged in and use in well ventilated areas.
– This painting does not need subsequent varnishing, it would lose part of
its metallic effect.
– Has very little mechanical endurance (because of its nature the pigment is on
surface and does not resist rubbing.) We do not advise this paint on surfaces that
are to be manipulated, eg doorknobs, railings, etc.