Shopping Cart

No products in the cart.

MTN PRO Luminous Paint

18,950

Looking for the best spray paint that emits light in the dark and gives a glowing effect in spaces and on objects without lights? The MTN PRO Luminous Spray Paint is your go to.

The water-based paint consists of pigments that charge up under the light in a short period of time, and then emit light in the dark for a long period of time, it is ideal for evacuation route signage, emergency panels, tunnels, mines, parking lots, and for decorating objects and spaces without lighting where signage is required.

The effect is long-lasting and to get a maximum luminous effect, it is advisable to apply it on white surfaces.

Another major perk is that it is easy to apply and easy to clean! Just spray on any clean surface and easily remove using acetone.

To obtain a striking finish, apply a coat of MTN PRO Primer first, and finish it off with a varnish coat of MTN PRO Acrylic Varnish. This is recommended for greater permanence and resistance to wear.

See below for more Product and Usage information 

GENERAL DESCRIPTION

Photoluminescent acrylic paint with pigments that charge quickly when exposed to light, and glow in the dark for a long period of time

FEATURES

  • Very fast drying
  • Doesn’t content lead nor other heavy metals
  • Good adhesion
  • Easy to apply and recoat
  • Long lasting luminescence. The light intensity depends on the amount and uniformity of the application. When applied on white surfaces, the maximum lighting effect is achieved
  • Subsequent varnishing with an acrylic varnish is recommended
  • Colour – Transparent yellowish

APPLICATIONS

Due to the product’s characteristics, its use is recommended on surfaces that need to be seen in the absence of light like, car parks, tunnels, pipelines, emergency and evacuation routes, emergency panels, extinguishing equipment. For labelling and signing:

  • Graphic arts
  • DIY
  • Industry
  • Security

To obtain a striking finish, apply a coat of MTN PRO Primer first, and finish it off with a varnish coat of MTN PRO Acrylic Varnish. This is recommended for greater permanence and resistance to wear.

Weight 0.30 kg
Dimensions 20 × 6.5 cm
INSTRUCTIONS FOR USE

Before using, shake the aerosol vigorously for approximately one minute.

Apply over clean and dry surfaces. On rusty metallic surfaces: Remove corrosion with a wire brush. In plastics like PS and PP apply first a primer layer.
See product’s behavior in any plastic surface.

Apply thin coats for better results, better three thin layers than a thick one.
It is recoatable after ten minutes.

Hold the aerosol upside down after use to purge the valve. If the nozzle
is blocked, replace it with a new one.

Do not apply on plugged-in electrical equipment and use in well-ventilated areas

Reviews

There are no reviews yet.

Be the first to review “MTN PRO Luminous Paint”