Shopping Cart

No products in the cart.

MTN PRO Plastic Primer 400ml

 15,800.00

MTN PRO Plastic Spray Primer is a colourless primer spray that may serve as a primer coat needed for the subsequent painting of plastic surfaces; these surfaces range from plastic parts, model-making, rear-view mirrors, to chairs, grates, toys, to mention a few.

Its formulation is based on a solution with special additives that give the paint extraordinary adherence on PP (Polypropylene) and other plastics.

Some of its favourite features are: it dries real quick, Good Elasticity, Easy to Apply and Recoat on Acrylics, Synthetics, and Nitro, Excellent Adhesion on Polypropylene (EPDM Modified).

See below for more Product and Usage information 

49 in stock

GENERAL DESCRIPTION

Anchor primer based on a solution of special additives that provide adhesion to PP. (Polypropylene)

FEATURES

  • Cap system – Pocket cap
  • Colourless
  • Very fast drying
  • Good elasticity
  • Easy to apply and recoat on acrylics, synthetics and nitro
  • Excellent adhesion on polypropylene (EPDM modified). On other plastics is recommended to perform a test before use

APPLICATIONS

Indicated as anchor layer in aerosol paint systems. Its adhesive power in various surfaces makes it ideal as an anchor layer for:

  • Automobile industry
  • Industry
  • Metallic surfaces
  • DIY
  • Crafts

Weight 0.30 kg
Dimensions 20 × 6.5 cm
INSTRUCTIONS FOR USE

Before using, shake the aerosol vigorously for approximately one minute after the noise of the mixer starts.

Apply over clean and dry surfaces. See product’s behavior in any plastic surface.

Apply thin coats for better results, better three thin layers than a thick one. It is recoatable after ten minutes with the same paint.

Hold the aerosol upside down after use to purge the valve. If the nozzle is blocked, replace it with a new one.

Do not apply on plugged-in electrical equipment and use in well-ventilated areas.

Reviews

There are no reviews yet.

Be the first to review “MTN PRO Plastic Primer 400ml”